How to Move a Washing Machine: Step-By-Step Washer Moving Guide

You in all probability know that when moving a fridge, you can’t, or reasonably you shouldn’t move a refrigerator with out defrosting it first. Transferring a washer to a brand new house is a little more sophisticated because washing machines require much more meticulous preparation regardless of whether they are entrance-load models or prime-load fashions.

Listed here are the preparation steps when shifting a washing machine by yourself:

Step 1. Remove any clothes from the washer

Though this step is fairly apparent, you should still discover the lacking sock after a better inspection inside the washer drum.

Step 2. Clean out the drum

That closer look at the drum could reveal some residue from the detergent you’ve been utilizing to scrub your clothes. Run a brief wash cycle with water only or use the pre-set Clear Cycle to clean your washer drum from any detergent residue.

By doing this, you’ll additionally clean out the drain strains of your washing machine.

Step 3. Dry out the drum

If there’s enough time previous to Shifting day, then leave the door of your washer open for roughly 24 hours after the Clear Cycle in order that the drum can dry out utterly.

If you’re pressed for time, then use a clear dry cloth to absorb any excess water left on the washing machine drum.

Step 4. Disconnect the power supply

To stop any threat of electric shock, you should turn off the power before handling your home equipment. Unplug the washer from the wall socket to disengage it from the facility community.

Step 5. Shut off the water supply

As soon as you’ve disconnected the washer from the electric network, it’s time to turn off the water supply too. Easy methods to disconnect your washer from the water supply?

Discover the native water valve and turn it clockwise to shut off the water. The same old location of that cease valve might be behind the appliance unit itself.

Train extra care to not disconnect any of the water drain strains when reaching for the water valve.

Step 6. Drain the hoses that provide water

One factor you can make sure of is that some water will still remain within the hoses.

Methods to drain a washing machine? To manually drain a washing machine that relies on each hot and chilly water provide to function, use the slip-joint pliers to disconnect the hot water supply hose from the water valve, then empty the hose into the bucket or an identical container.

Do the identical with the cold water supply hose – disconnect it from the valve, then empty it safely into a container of some sort.

To drain a washer that heats the water contained in the unit, you solely must drain the chilly water supply hose. To avoid spills, empty only one hose at a time.

Step 7. Take away and pack the hoses that provide water

Now that you’ve eliminated any excess water from the drain hoses, it’s time to take away those hoses altogether as a part of the preparation to maneuver a washer by yourself.

Use the pliers once more and disconnect the water provide hoses from the washing machine. Pack them in a large plastic bag and place them in a cardboard box, then label that box WASHING MACHINE Equipment.

Step 8. Empty the washer’s drain hose

Your washing machine ought to have one drain hose that will empty all of the dirty water into the wastewater discharge canal. Comply with that drain hose till its discharge point, then disconnect it from there and attach it safely to the again of your home appliance.

The washer should have a particular bracket for holding that drain hose. Use further tape to secure it so that no tripping accidents occur whereas shifting the washing machine with a dolly.

Step 9. Set up the transit bolts within the washer

Can you move a washing machine without transit bolts? Sure, you may but you shouldn’t. As you already, delivery bolts will keep the washer drum locked in place so that it won’t get broken through the haul. With out those locking metallic rods, the suspension mechanism of your washing machine will most definitely get broken and its restore might price greater than a model new washer.

Seek the advice of the washer’s person handbook to learn how to insert the transit bolts. The exact set up methodology will fluctuate however typically, there must be two openings within the rear aspect of the washing machine, one for every bolt. The thought is to insert the rods carefully and then to show them slightly so that they lock the drum in place.

Contact the native home equipment store for assistance if you’re not sure how to install the transit bolts of your washer.

Step 10. Collect all the manpower you’ve got

The final preparation step when shifting a washer between properties is to make sure your helpers are there, able to provide you with a serving to hand. You should have at the very least one other particular person in your quest to maneuver your washer, preferably two.

The perfect room-by-room packing checklist on your move

Moving stage: How to move a washing machine by your self [5 steps]

As you may see for yourself, getting a washing machine prepared for transferring is a 10-step course of that can be each time-consuming and difficult – especially the steps linked to disconnecting the water provide and draining the remaining water from the washer hoses.

Now comes the washing machine relocation stage, bringing some excellent news (the process is pretty straightforward) and a few unhealthy information as well (the washer moving half might be harmful).

Comply with these steps to learn the proper means to maneuver a washing machine:

Step 1. Fasten the facility cord

Secure the power cord to the again of your appliance – use a little bit of packing tape to verify it stays in place. The very last thing you’d want is to journey in your washer’s swinging cable during the transferring course of.

Step 2. Pull out the washer completely

You will have had to tug the appliance a bit so as to succeed in the water valve behind it or to disconnect and drain the water supply hoses. Now, it’s time to drag out the appliance fully from its resting place.

Place a slider on every entrance leg or, should you don’t have any furniture sliders at hand, place a piece of delicate cloth below those legs or edges to facilitate the sliding activity with out inflicting any injury to the surface of the flooring.

Step 3. Pack the washing machines in blankets

This step is all about the bodily safety of your washing machine in the course of the move. Now that you’ve the washer away from the wall or out of its dedicated room within the cabinet, you’ve got to make sure it is well-protected towards unintended hits throughout transit.

Wrap the equipment with furniture blankets in such a manner as to not depart any unprotected areas. Ordinary house blankets may work okay so long as they’re tender sufficient (not rough or coarse) to protect the washer’s floor, not scratch it.

When you cover the washer floor in its entirety, secure the blankets utilizing twine, rope or straps.

Step 4. Load the washer onto the appliance dolly

You’re going to wish an appliance dolly (the 2-wheel hand truck) to move your washing machine out of your home and load it into the awaiting moving vehicle. A furnishings dolly (the 4-wheel platform) might additionally work high quality but you’ll discover it tougher to maneuver around corners and unimaginable to use downstairs or upstairs. That is by far the easiest way to maneuver a washing machine.

So, how to maneuver a washing machine with an appliance dolly? Have your two helpers tilt the washer backward so that you can slide the shifting dolly underneath the equipment. Use the straps of the dolly to secure the unit as it’s nonetheless on the ground, then tilt the transferring gear again until the washer will get balanced on the wheels. Do that slowly and thoroughly.

Once the washer is loaded on the appliance dolly, tighten the straps or rope again to verify the washing machine is 100% secured and ready to be wheeled out.

Step 5. Load the washer into the moving truck

As you’re taking your washing machine out of the house, make an effort to keep it in an upright position. Shifting a washing machine on its side might be risky because the washer drum could get broken – that’s, to lose its proper alignment.

Load the washer using the ramp of the moving automobile. Both way, the washing machine must not move during the relocation trip to the brand new residence. As soon as inside, secure the home equipment to the side of the van using rope or specialized ratchet straps.

Important: After you’ve unloaded and positioned the washing machine in the brand new residence, don’t overlook to remove the shipping bolts before utilizing it once more. Better yet, you may have assistance to set it up correctly – especially when it comes to hooking up the water strains in and out of the washer.

Remember that moving a washing machine isn’t a joke, and subsequently you must take that transferring process severely. In case you don’t, harm to the expensive home appliance and personal accidents are positively not out of the query.